bosch vision 300 series washer error codes

There are several reasons why you may experience Bosch vision 300 series washer error codes. First, you may have a clogged drain pump. Next, you should check your drain filter, water inlet valve, and motor control module. If these do not help, you should contact Bosch customer service.


Fixing a clogged drain pump

In order to fix the clogged drain pump, you need to know how to remove the drain pump cover. It is located near the bottom of the washer. You can also remove the hose clamp and move the drum. Once you have removed the pump cover, you can clean it with a brush or a rag. Once you have cleaned the pump cover, you can reinstall it. After replacing the pump, you need to empty the washing water in order to prevent further damage.

If your washer is not draining water properly, the drain pump may be blocked by dirt or lint. You can clean the drain pump by cleaning the impellers and the housing. Regular cleaning can prevent recurring problems. To clean the drain pump cover, remove the rubber thread and rinse it under water. To clean the housing, remove the dirt and debris. You can then inspect the impellers to make sure they are free of blockage.


Another cause of a clogged drain pump is a clogged drain hose. It can also be damaged or blocked if the drain hose is not properly connected to the pump chamber. To test if the pump is blocked, unplug the washing machine from the wall and turn it over. The drain hose can be disconnected from the pump chamber using a pliers. If the pump still won’t drain, you may need to consult a plumber.

If the error code E24 is displayed, it is likely that the drain pump is clogged. This issue may be caused by a clogged drain hose or a loose pump cover. Before inspecting the drain pump, make sure to put on protective gloves and avoid soiled fingers. If you find a blockage, you can try to remove the pump cover.

The drive belt can also be the cause of a clogged drain pump. If this is the case, you need to replace it.

Checking the water inlet valve

If your washing machine displays error codes, the first step is to check the water inlet valve. Often, this part will fail. If it does, you can turn off the water valve and check the problem. However, it is also possible that the problem is caused by a blocked drain hose or a temperature sensor problem.

Error Code 7 indicates a problem with the motor drive circuit. In some cases, this error may be caused by a problem with the motor carbon brushes or the motor control module. In other cases, it may also be caused by a wiring circuit issue. In such a case, it’s important to call a technician.

Another possible error code is Er1. This error code is usually caused by a faulty water inlet valve. To check the water inlet valve, open the lower right-hand panel and remove the filter cap. The black hose should then be connected to a shallow pan, and the water should drain from the machine. Checking the water supply is a simple way to fix a problem and ensure that your washing machine is working properly.

In some cases, the problem may be related to the electronic control of your Bosch washing machine. If this happens, turn off the water and let it sit for at least 20 minutes. After that, turn it back on and test to see if the error code goes away. If not, you can check the filters or the hoses.

Another common problem is a kinked hose. If the hose is kinked, or has sand in it, the water will not enter the machine. In other cases, the valve may be blocked by sand or debris.

Another common issue that causes a Bosch washing machine to not drain is a blocked drain hose. This clog can cause water to back up into the machine and prevent it from draining properly. Cleaning the drain pump is a simple solution, but if the problem persists, it is best to have it checked by a professional.

Checking the drain filter

If your Bosch vision 300 series washer does not drain water, you may need to check the drain filter. It is located in the back of the washer, near the bottom. It is usually hidden by a panel cover, but it is easy to access and clean. You can also check the drain hose for obstructions. It may be installed incorrectly, causing water to siphon out.

The drain hose may be kinked or bent. If it is, it may be causing water to return to the washer. It can also be blocked. To clean the drain hose, remove the drain hose from the washer and unplug it. You can also check the drain connection to make sure that the hose is connected to the sewer. If the hose is clean, you can reconnect it. If the hose is dirty, you may need to call a plumber to fix it.

If your Bosch washer does not drain properly, it could be due to a blocked drain hose. You can easily remove the clog by removing the drain hose, but if you are unable to do so, it could also be a problem with the drain pump. If you cannot remove the clog, you can call a Bosch service technician. They will diagnose the problem and recommend the best solution.

The E6 error means that the drain pump cannot drain the water within a certain period of time. This can be due to a blockage or foreign objects that have lodged in the impeller of the pump. If you see the E6 error code in your washing machine, it is most likely that the drain pump is faulty and is causing the problem. If you can find the source of the error, you can try replacing it.

If the E32 error code does not resolve the problem, then you can consider another possibility – a clogged drain filter. The drain pump is an important part of your washing machine. It is often overlooked, but it is important to check it if you experience this problem.

Checking the motor control module

If you notice that your washing machine is emitting an error code, you should check the motor control module. If it’s not functioning properly, you should replace the motor control module. The problem might be with the motor or with the power supply. Check the power supply and make sure that the voltage is within the range. You can also check the motor connector plug and carbon brushes to make sure that they’re in good shape.

A common Bosch washing machine error code is error code 7. This error code means that there’s an issue with the motor drive circuit. This issue could involve the motor’s carbon brushes or the motor control module. It could also be an issue with the wiring circuit.

The next error code is E3. The machine displays this code because there’s an abnormal amount of soiling. If the error code is ‘0’, then the motor control PCB is faulty. If the motor is not working properly, then the NTC thermistor may be faulty. In some cases, an error code of ’11’ means there’s something wrong with the motor. If this happens, you should contact a qualified engineer to repair the washer.

The first step in troubleshooting a Bosch washer error is to check the motor control module. This is important because if this part is bad, the entire machine will not function. If the control unit has burned out, you can replace it with a new one.

If the error code is E13, you should first check the pressure sensor to make sure the proper amount of water is being used for the cycle. The sensor is located near the control module on the floor panel of the washing machine. If the sensor is working properly, the code should remain on the washer’s display.

If you’re not sure how to fix an E01/F06 error, you can try to reset the washer’s motor by removing the power for ten minutes. After this, you can run diagnostic tests on the machine.